How to Use Your Ooey Gooey Face Mask
USE: Mix one part powder with one part clean, lukewarm or cool, clean water. Mix until thickened but not runny. Apply to clean, dry, freshly-washed face with no other product applied to it.
About 1 tablespoon (scoop in the mixing bowl set is 1 tablespoon) is generally enough mix for one face. Relax for 15-20 minutes & seal in those nutrients. Peel off completely, rinse and resume skincare routine.
DO NOT wash excess mask or peeled-off mask pieces down drain. Toss in trash only.
Tips & Tricks to Success Mixing Your Mask
Check Water Temperature
• Use cool or room-temperature water. Warm or hot water can thin out the mixture and make it harder to set properly.
Adjust the Mask-to-Water Ratio
• 1:1 powder to room-temp water is the recommended mix ration. To ensure a thick mask, use less water to start.
Add .75 tablespoon to 1 tablespoon Ooey Gooey Mix, and then add a few more drops of water to thin if needed.
• Add More Mask: If the mixture is already thin, sprinkle a little more powder into the mix and stir until it reaches the desired thickness.
NOTE: Adding less water and then thinning will work better than adding too much water and trying to thicken with more powder.
Mix Quickly and Efficiently
• Add powder first, then water for best results.
• Mix the mask briskly but avoid over-mixing, as this can cause the mask mix to start setting before the desired consistency is achieved.
• Use a flat spatula to scrape the sides of the bowl while mixing, ensuring all the powder is incorporated. Stop mixing as soon as the powder is mixed.
Let the Mix Rest Briefly
• After mixing, let the mask sit for 30 seconds to allow the powder to absorb the water fully before applying.
Troubleshooting for Thin Mixtures
• If the mask is already too thin after mixing:
◦ Immediately add more powder and mix quickly before it starts to set.
◦ Use thinner mask for a smaller area of the face instead of discarding it.